← Back to Knowledge Centre

Electricity Bill Analysis

How to Read an Industrial Electricity Bill

For commercial and industrial consumers in India, the monthly electricity bill is rarely a simple multiplication of units consumed by a flat rate. High-Tension (HT) and large Low-Tension (LT) utility bills—such as those issued by MSEDCL, Tata Power, Adani Electricity, or state DISCOMs—contain multiple fixed, variable, and penalty components that significantly alter your true cost of power.

1. Connection Identity & Sanctioned Parameters

Every industrial bill begins with your statutory connection profile. Two numbers matter most for energy planning:

  • Contract Demand (kVA): The maximum apparent power you have contracted with the DISCOM. Exceeding this threshold triggers steep demand penalties (often billed at 1.5x to 2x the normal demand charge for the excess kVA).
  • Billing Demand (kVA): Usually calculated as the higher of your actual recorded Maximum Demand (MD) during the month or a minimum percentage (commonly 75% to 85%) of your Contract Demand.

2. Energy Charges: kWh vs. kVAh Billing

Many Indian states—including Maharashtra—have migrated commercial and HT industrial consumers from active energy (kWh) billing to apparent energy (kVAh) billing. Under kVAh billing, poor power factor automatically inflates the number of billed units without needing a separate penalty line item.

Effective Unit Cost (₹/kWh) = Total Monthly Bill Amount (₹) ÷ Total Active Energy Consumed (kWh)

Always calculate your Effective Unit Cost rather than looking only at the base energy tariff. When demand charges, wheeling charges, Fuel Adjustment Charges (FAC), electricity duty, and tax on sale are included, a ₹7.50/unit base tariff frequently translates into an effective landed cost of ₹10.50 to ₹13.00/kWh.

3. Time-of-Day (ToD) Tariff Slots

Industrial meters record consumption across distinct time zones. Typically, late-night hours carry a rebate, standard daytime hours carry the base rate, and evening peak slots (e.g., 18:00 to 22:00) carry a surcharge. Understanding your daytime vs. nighttime split is essential before sizing a rooftop solar plant or evaluating battery energy storage (BESS).

4. Common Cost Leaks to Screen First

  • Over-contracted demand: Paying minimum billing demand every month for kVA capacity your factory never uses.
  • Low Power Factor / Lagging or Leading kVArh: Causing higher kVAh billing or losing PF rebates.
  • Unmonitored Fuel Adjustment Charges (FAC): Monthly tariff volatility that distorts annual energy budgets.
Engineering Best Practice: Collect at least 12 consecutive months of electricity bills before making any solar CAPEX or load-modification decision. Single-month snapshots miss seasonal production peaks and monsoon/summer HVAC swings.

NEED PROJECT-SPECIFIC ANALYSIS?

Apply this engineering framework directly to your facility or tender.

Explore Electricity Bill Analysis → Request a Consultation
Technical & Professional Disclaimer Preliminary electricity bill analysis is for decision-support and is not equivalent to a statutory or BEE-accredited energy audit.

Continue Reading

WhatsApp