← Back to Knowledge Centre

Solar Engineering

Understanding Performance Ratio (PR)

While Specific Yield tells you how much energy a solar plant generates, Performance Ratio (PR) tells you how efficiently the plant converts the available sunlight hitting its panels into usable AC electricity.

Performance Ratio (PR %) = [ Actual AC Energy Output (kWh) ÷ Theoretical Ideal Output (kWh) ] × 100 Where Theoretical Output = Installed DC Capacity (kWp) × Plane-of-Array Irradiation (kWh/m²) ÷ 1 kW/m²

Where Do the Losses Go?

A well-engineered commercial rooftop PV system in India typically achieves an annual PR between 75% and 82%. The remaining 18% to 25% is accounted for by real-world physical losses:

  • Temperature Losses (6% – 10%): Solar cells lose efficiency as their temperature rises above 25°C.
  • Soiling & Shading Losses (2% – 6%): Dust accumulation and near-object shadows.
  • Inverter & Conversion Losses (2% – 3%): DC-to-AC conversion efficiency and clipping.
  • DC & AC Cable Ohmic Losses (1.5% – 3%): Voltage drop across strings and AC runs.
  • Module Mismatch, LID & Auxiliaries (1.5% – 3%): Light-induced degradation and string mismatch.

PR vs. Specific Yield

A plant in a hot desert may have a higher Specific Yield (because there is more sun) but a slightly lower PR (because higher ambient temperatures increase thermal losses) than an identical plant in a cooler hill station. Therefore, PR is best used as a quality benchmark for design, component selection, and ongoing O&M diagnostics.

NEED PROJECT-SPECIFIC ANALYSIS?

Apply this engineering framework directly to your facility or tender.

Request Technical Review → Request a Consultation
Technical & Professional Disclaimer Performance Ratio is temperature-dependent and must be evaluated alongside irradiance data and IEC 61724 measurement standards.

Continue Reading

WhatsApp